Home / Service Areas / Hubbard
Hill County, TexasOvergrown acreage on the Hill County prairie does not have to be cleared the hard way. We mulch standing brush into the ground where it grew, so there is no burn pile in the middle of your field and nothing hauled out through your gate.
Most of our Hubbard work is on hay ground and fence-line reclamation. Whether it is a homesite, a hunting tract or pasture you want back, the approach is the same: grind what is standing, leave what you want, and put a mulch layer down instead of bare dirt.
Around Hubbard most of what we take out is mesquite, cedar and honey locust. Mesquite and cedar come back from the root, so expect a follow-up pass on the heaviest ground inside two to three years.
On black clay we watch the weather closely. Mulching on saturated prairie soil tears up ground, so wet-season work gets scheduled around it.
Thick brush and small trees ground down in place. Sight lines back, walkable ground back, no debris pile left behind.
Pad, driveway and septic area cleared for a build while the trees worth keeping stay standing.
A clean lane down the fence row across Hill County so you can see your wire and keep brush off it.
Take grazing and hay ground back from the brush line that has been creeping in a few feet a year.
Lease roads, ranch trails and walking paths cut wide enough for a truck and trailer to use.
Shooting lanes, browse at deer height and sunlight to the ground for food plots on Hill County tracts.
Density drives the price more than acreage. Here is the range we work from around Hubbard.
| Density | What it looks like | Per acre |
|---|---|---|
| Light | Scattered brush over grass | $1,400 – $1,700 |
| Moderate | Continuous understory, stems to 4" | $1,800 |
| Heavy | Solid mesquite, stems 4–8" | $2,200 – $2,700 |
| Severe | Decades of growth, tight canopy | $2,800 – $3,400 |
Call or fill out the form with the location and rough acreage. A dropped pin or an address is enough for us to pull it up on satellite before we drive out.
Density drives cost more than acreage does. We look at stem size, how thick the understory is, slope, and how a trailer gets in. Then you get a firm number.
The mulching head grinds standing brush and small trees where they stand. No burn piles, no dump trailers, no gate ruts from hauling debris out.
You look it over while the machine is still on site. If a spot needs another pass, we make it then and there.
Most Hill County acreage prices between $1,200 and $3,500 an acre depending on how heavy the growth is. We look at stem size and how thick the understory runs before putting a number on it.
Mostly mesquite, cedar and honey locust. Mesquite and cedar come back from the root, so expect a follow-up pass on the heaviest ground inside two to three years.
Yes. Hubbard is about 30 miles from our base in Richland, and Hill County is inside our regular service range. On smaller jobs we try to pair nearby properties in the same week so the trailer trip is not carried by one customer.
That is the normal request and the machine handles it well. The operator picks what stays as he works, so you keep your shade and your mature timber and lose the scrub.
No. Everything gets ground into a mulch layer that stays on the ground. That means no burn ban delays and no dump fees on your bill.
Tell us where the property sits in Hill County and roughly how much needs clearing. We will come look at it and give you a real number.
Prefer to talk it through?
Call (936) 249-2761.
If we are on a machine we will call you back the same day.
No obligation · No deposit to get a quote · We travel to the property
